USRP X410 has 4 x TX/RX0 and 4 x RX1 RF SMA ports. Can it be configured to operate in following configurations?
USRP X410 has 4 x TX/RX0 and 4 x RX1 RF SMA ports but RX0 and RX1 ports of the same channel are not independent. Either RX0 or RX1 can be used for receive.
Only 4 x TX with 4 x RX configuration is supported.
Collaborate with other users in our discussion forums
A valid service agreement or active software subscription may be required, and support options vary by country.
Helpful
Not Helpful