How to interpret a Maintenance Software report of ECUTS

Updated Sep 25, 2024

Environment

Software

  • ECU Test System Maintenance Software

System

  • ECUTS-16001
  • ECUTS-16000

There are many contents in Maintenance Software report of ECUTS(ECU Test System). This article will guide you how to interpret a maintenance software report.
The report contains the following information:
  • Overall Status
  • General Information
  • System Configuration Verification Summary
  • System Components – General Information
  • System Ports – General Information
  • System Components – Operations Performed
  • System Components – Calibration Information and Current Temperatures

1. Overall Status
  • Displays a summary of the system's status. 
image.png
2. General Information
  • Displays the report information:
    • Start date and time
    • End date and time
  • Displays the test system's general information:
    • Configuration Name
    • Model Name
    • Part Number
    • Serial Number
    • System Tag
image.png
3. System Configuration Verification Summary
  • Displays the results of the system configuration check step and enlists the components that were:
    • Name Changes
    • Missing Components
    • Components with Problems
    • Components Not Expected but Found
    • Missing Ports
    • Ports with Problems
    • Ports Not Expected but Found
image.png
4. System Components – General Information
  • Displays a table that enlists the instruments that are present in the test system with:
    • Name
    • Model Name
    • Serial Number
    • Firmware Version
    • Location
image.png
5. System Ports – General Information
  • Displays a table that enlists the ports that are present in the test system with:
    • Name
    • Type
    • Location
image.png
6. System Components – Operations Performed
  • Displays a table that details the actions that were executed on each component and their status:
    • Passed—The test for this component passed.
    • Failed— The test for this component failed. Refer to the report footnote for additional details.
    • N/A—The operation is not supported for this component.
image.png
7. System Components – Calibration Information and Current Temperature(s)
  • Displays a table that details:
    • Name
    • External Calibration Date
    • External Calibration Temperatures
    • Recommended External Calibration Interval
    • Self Calibration Date and Time
    • Self Calibration Temperatures
    • Current Temperatures
       
image.png
Above are introductions of the Maintenance Software report of ECUTS
 

Other Support Options

Ask the NI Community

Collaborate with other users in our discussion forums



Request Support from an Engineer

A valid service agreement or active software subscription may be required, and support options vary by country.