Maximum Time Width of 200 MV Output From PXI-6733 DAC When Power Is Turned On

Updated Jun 3, 2024

Reported In

Hardware

  • PXI-6733

Issue Details

As the power-on state of PXI-6733 is stated as 0V (±200 mV), what is the maximum time width of the 200mV output from the PXI-6733 DAC when the power is turned on?
Is it within 1 second at the maximum, may output more than 10 seconds, indefinite depending on conditions, etc.?

Solution

If it is regarding a random error of ±200 mV at the power-on state, there is no clear confirmation about how long the time width.
Whenever PXI-6733 is powered and the random ±200 mV appears on its output it will stay there until a value is given to it.

Additional Information

PXI-6733 is not the best fit if the application uses very sensitive DUT.
If the PXIe-6733 causes random error of ±200 mV at the power-on state, then the solution is to change the PXI-6733 with some other similar hardware or can add relays in front of the PXI-6733 and after initialization of the system switch on the relays (something similar to NI SMUs or AWGs application).

Related Links

Other Support Options

Ask the NI Community

Collaborate with other users in our discussion forums



Request Support from an Engineer

A valid service agreement or active software subscription may be required, and support options vary by country.