How To Create a TDR file in NI Digital Pattern Editor

Updated Feb 13, 2025

Environment

Hardware

  • PXIe-6570
  • PXIe-6571

Driver

  • NI-Digital Pattern Driver

I want to create a TDR measurement file in NI Digital Pattern Editor for my project, but I don't know how to do it.

  1. Open Digital Pattern Editor.
  2. Select File » New » TDR Configuration.

image.png

  1. Expand Comments to add information about the TDR test configuration.

image.png

  1. Check the boxes next to each channel you want to include in the TDR measurement.
  2. Depending on your goals, use the following table to determine which actions to take once you set up your TDR measurement document.

 image.png

 

Those menus button are located here.

image.png

  1. To remove channels no longer present in the active pin map, right-click the TDR configuration table and select Delete selection.

Related Links

Configuring Time Domain Reflectometry - NI

Other Support Options

Ask the NI Community

Collaborate with other users in our discussion forums



Request Support from an Engineer

A valid service agreement or active software subscription may be required, and support options vary by country.

Was this information helpful?

Yes

No