[STS] How to turn on and off Result Processors in the Operator Interface

Updated Mar 4, 2024

Environment

System

  • STS T1 M1
  • STS T1 M2
  • STS T4 M2

I am using NI Semiconductor Test Operator Interface to run my test in STS and I want to disable the test report generated during testing. But I don't know how to do it. 

To disable the STS test report in operator interface, you just need follow steps below:

  1. Click button Configure Station in NI Semiconductor Test Operator Interface.Screenshot 2024-03-02 133427.jpg
  2. In popup window Configure Station Settings, click tab Advanced.
  3. Click Result Processing.Screenshot 2024-03-02 133530.jpg
  4. In the collum Enabled, you can disable the report type you don't want by click option box.Screenshot 2024-03-02 134217.jpg
  5. click OK button.

You can see "Report generation is disabled" when you click View Reports button in the operator interface.

Screenshot 2024-03-02 133839.jpg

Other Support Options

Ask the NI Community

Collaborate with other users in our discussion forums



Request Support from an Engineer

A valid service agreement or active software subscription may be required, and support options vary by country.