Error -250891 or -250890 The SLSC Chassis Firmware Is Older/Newer Than the NI-SLSC Driver

Updated Nov 2, 2023

Reported In

Hardware

  • SLSC-12001

Driver

  • NI-SLSC

Issue Details

  • I get one of the following error when deploying my VeriStand project.
Error -250891 occurred at Project Window.lvlib:Project Window.vi >> Project Window.lvlib:Command Loop.vi >> Project Window.lvlib:Connect to System.vi 

Possible reason(s): 
The SLSC chassis firmware is older than the NI-SLSC driver. Upgrade the firmware or downgrade the driver to use the chassis.

Error -250891 - SLSC Firmware mismatch
 

Error -250890 occurred at Project Window.lvlib:Project Window.vi >> Project Window.lvlib:Command Loop.vi >> Project Window.lvlib:Connect to System.vi

Possible reason(s):
The SLSC chassis firmware is newer than the NI-SLSC driver. Upgrade the driver or downgrade the firmware to use the chassis.
  • ​​​​​I get one of the above errors when running my LabVIEW VI.

Solution

The firmware version on the target SLSC chassis does not match that of the NI-SLSC driver installed on the host device and, if using VeriStand, the target being deployed to.

To resolve this: 
  1. Update the firmware of the target SLSC chassis to the matching version.
  2. Retry the deployment or run the application again.

Alternatively:
  1. Uninstall the NI-SLSC driver from the host & target.
  2. Install the version that matches the firmware on the SLSC chassis.

Related Links

Other Support Options

Ask the NI Community

Collaborate with other users in our discussion forums



Request Support from an Engineer

A valid service agreement or active software subscription may be required, and support options vary by country.