Archived:Device Support for NI-DAQmx Virtual Channel Calibration

Updated Dec 30, 2021

NI does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

Reported In

Software

  • Measurement & Automation Explorer (MAX)

Driver

  • NI-DAQmx

Issue Details

When I create an NI-DAQmx global virtual channel or a task for my NI PCI-6220 (or other Multifunction DAQ device) in NI-MAX, the channel calibration tab appears so that I can calibrate the global virtual channels or tasks I have created. However, when I use the NI DAQPad-6015, I do not see this option. Which DAQ devices support channel calibration?

Solution

The following devices do not support NI-DAQmx virtual channel calibration:

USB DAQ:
  • NI DAQPad-6015
  • NI DAQPad-6016
  • NI USB-600X
B Series DAQ:
  • NI PCI-6010
  • NI PCI-6013
  • NI PCI-6014
All other E Series, M Series, and S Series devices support the calibration tab including the portable M Series devices (NI USB-6251 and NI USB-6259).

 

Related Links

Other Support Options

Ask the NI Community

Collaborate with other users in our discussion forums



Request Support from an Engineer

A valid service agreement or active software subscription may be required, and support options vary by country.