Configure ISO Reset Timing on MP65 Reader

Updated Mar 31, 2020

Reported In


  • Micropross Accessories


HW: MP65
SW: MP300Com .dll

Issue Details

I would like to configure the ISO reset timing on an MP65 reader. Specifically, I would like to adjust timing between Vcc High to RST during a 7816-3 Cold Reset, as well as set Ta, Tb, and Tc.

How can I do this with my MP65?


Unfortunately, the MP65 is not capable of changing these parameters. In order to do so, you will need to use an MP300 TC3 along with the embedded sequencer.