This content is not available in your preferred language.

The content is shown in another available language. Your browser may include features that can help translate the text.

Ballard PXIe MIL-STD-1553 Getting Started For RT Target

Updated Dec 6, 2018

Reported In

Hardware

  • LV-222-510-000
  • LV-222-511-511
  • LV-222-555-555

Software

  • LabVIEW

Operating System

  • PharLap

Issue Details

We purchased PXIe Ballard MIL-STD-1553 board and going to use it in PXI with Real-Time OS, but I can't find any getting started resources.
Where can I download LabVIEW drivers for it? Where I can find the Ballard MIL-STD-1553 manual or user guide?

Solution

OmniBus II NI PXIe User Manual has board funcionality and I/O description.

If you have PXI system with Windows OS installed refer to Ballard PXIe MIL-STD-1553 Getting Started For Windows Target.

In order to install Ballard driver to RT Target do the following:
  1. Download and install LabVIEW Astronics Ballard driver from Astronics Ballard LabVIEW Software Driver page. Note that LabVIEW Real-Time Drivers should be installed during setup:
  1. Install Astronics Ballard Technology Driver Support and NI-VISA driver to RT Target. Refer to Installing Software on Your Real-Time (RT) PXI Controller to know how to call Software Wizard.
 

 

 

Additional Information

The Ballard driver uses a different kernel for Windows and RT. Therefore there are some differences in how the card will appear across systems.
In RT:
  • The card WILL show up in MAX 
  • The Ballard driver WILL show up in MAX
  • The card will NOT show up in the BTITST32 application
  • RT devices will NOT show up in Windows Device Manager

WAS THIS ARTICLE HELPFUL?

Not Helpful