This content is not available in your preferred language.

The content is shown in another available language. Your browser may include features that can help translate the text.

How to Set Up a Multi-layer Design in NI Ultiboard

Updated Apr 5, 2023

Reported In

Software

  • Ultiboard

Operating System

  • Windows

Issue Details

I want to create a PCB with six layers. How do I set this up in Ultiboard?

Solution

To setup the PCB layers in Ultiboard, select Options»PCB Design»Copper Layers.  A layer pair is a PCB material that has copper on both sides, if you entered 1 in the Layer Pairs field, you have a copper top layer and a copper bottom layer where you can route traces; this is a two-layer PCB setup.

A multi-layer board is manufactured by placing isolation in between the layer pairs then gluing them together. To setup a six-layer board, you define the layer pairs as 3 in Ultiboard.

A single layer stack-up has copper on one side and this setup is not common. If you entered 2 layer pairs and 1 top stack-up, this means you have a five-layer board.

Related Links

Create a Single-Sided PCB in Ultiboard

Other Support Options

Ask the NI Community

Collaborate with other users in our discussion forums



Request Support from an Engineer

A valid service agreement or active software subscription may be required, and support options vary by country.

Was this information helpful?

Yes

No