Error 15 in Calibration Executive 4.2

Updated Jan 18, 2018

Reported In

Software

  • Calibration Executive

Driver

  • NI-DAQmx 17.1
  • NI-RFSA 17.1
  • NI-SCOPE 17.5
  • NI-568x 17.0

Issue Details

I am receiving the following error after installing CalExec 4.2

​Error 15 occurred at Call Library Function Node in nisyscfg.lvlib:Initialize Session.vi: 1230001->cex_GUIWizardSysConfigAliasFind.vi->cex_GUIWizardVISAFind.vi->cex_GUIWizard.vi- at step Call Wizard.ProxyCaller

LabVIEW: Resource not found.
=============================
Serial poll byte queue overflow.

Solution

  • Check the Calibration Executive 4.2 Readme to ensure that the drivers installed on the system match the drivers in the readme.
  • Install updates for any drivers that do not match those required in the readme.

Additional Information

Calibration Executive 4.2 requires manual update of the following drivers:
  • NI-DAQmx 17.1
  • NI-RFSA 17.1.2 (Includes NI-RFSG 17.1.2)
  • NI-SCOPE 17.5.1
  • NI-568x 17.0

WAS THIS ARTICLE HELPFUL?

Not Helpful