This content is not available in your preferred language.

The content is shown in another available language. Your browser may include features that can help translate the text.

cRIO-904x Changing Module Programming Mode in MAX

Updated Jan 19, 2024

Reported In

Hardware

  • cRIO-9040
  • cRIO-9041
  • cRIO-9042
  • cRIO-9043
  • cRIO-9045
  • cRIO-9046
  • cRIO-9047
  • cRIO-9048
  • cRIO-9049

Software

  • Measurement & Automation Explorer (MAX)

Driver

  • NI CompactRIO

Issue Details

What software do I need to have installed on my computer to be able to change the programming mode of modules in my cRIO-904x chassis between Real-Time (NI-DAQmx), Real-Time Scan (IO Variables), and LabVIEW FPGA?

Solution

In order to change the programming mode of the modules in your CompactRIO with NI-DAQmx (cRIO-904x or cRIO-905x series), refer to the getting started guide for your specific controller on what software you will need. Once you have the proper software installed for your application, you can follow the steps further down in your cRIO controller Getting Started Guide to change the programming mode.

Related Links

Other Support Options

Ask the NI Community

Collaborate with other users in our discussion forums



Request Support from an Engineer

A valid service agreement may be required, and support options vary by country.