Calibration and Self-Cal Procedure for USB-600x Devices

Updated Sep 9, 2022

Reported In

Hardware

  • USB-6000
  • USB-6008
  • USB-6002
  • USB-6003

Issue Details

I have an NI USB-600x DAQ device and I would like to either calibrate it myself or send it in to NI for calibration. Is there a calibration manual or calibration service offered by NI for these devices?
 

Solution

The NI USB-600x devices do not have the ability to be calibrated by an end user through an external calibration procedure. The devices are configured and tested during manufacturing but they cannot be calibrated by end-users (even with Calibration Executive) and NI does not offer calibration services for these devices. 
 

Additional Information

The NI USB-600x devices do not support self-cal in NI MAX either. The self-cal button in MAX will either be grayed out or missing depending on software version. 

Related Links

Other Support Options

Ask the NI Community

Collaborate with other users in our discussion forums



Request Support from an Engineer

A valid service agreement may be required, and support options vary by country.