Calibration Report only Show Tests on Counter 0

Updated Nov 8, 2018

Reported In

Hardware

  • PXIe-6356

Issue Details

I sent in my PXIe-6356 to NI for calibration. My calibration report for just provides information about CTR0. Were my other counters tested? 

Solution

From the B/E/M/S/X Series Calibration Procedure : B/E/M/S/X Series devices have only one timebase to verify, so only Counter 0 needs to be checked. It is not possible to adjust this timebase, so only verification can be performed.

WAS THIS ARTICLE HELPFUL?

Not Helpful