Solution
LabVIEW FPGA Module 2022 Q3 and onwards:
The 64-bit version of the LabVIEW FPGA Module added addiotional targets:
- CompactRIO: cRIO-903x/904x/905x/906x
- R Series PCIe: PCIe-782xR/784x/785x
- R Series PXIe: PXIe-782xR/784xR/785xR
- R Series USB: USB-784xR (OEM)/785xR (OEM)
- Ethernet RIO: NI 9147/9149
- Industrial Controllers (with NI Linux RT): IC-3120/317x
LabVIEW FPGA Module 2021 SP1 and older:
The 64-bit version of the LabVIEW FPGA Module only supports some modules in the following hardware lines:
- USRP RIO devices
- PCIe-576x/577x/5785/798x
- PXIe-5163R/5164R/517xR/5745/576x/577x/5785/659xR/7902R/791x/797xR/798x
This list includes:
- FlexRIO devices
- High-Speed Serial devices
- Vector Signal Transceivers
- Vector Signal Analyzers
- Vector Signal Generators
- Reconfigurable Oscilloscopes
Note: This is the hardware range supported as of LabVIEW FPGA Module 2021 64-bit. For a list of supported hardware in a different version, refer to the version's Readme document, which can be found on the download page (refer to
Related Links).
Other devices like R Series or CompactRIO devices can be used with the LabVIEW FPGA Module 64-bit as long as the bitfile was compiled using the LabVIEW FPGA Module 32-bit. The 64-bit software support for the NI CompactRIO and NI R Series Multifunction RIO drivers allows to communicate with the bitfiles using the LabVIEW FPGA Module 64-bit, but the devices cannot be programmed using 64-bit software.