Dieser Inhalt liegt nicht in Ihrer bevorzugten Sprache vor.
Der Inhalt wird Ihnen in einer anderen verfügbaren Sprache angezeigt. Ihr Browser bietet ggf. Funktionen, die Sie bei der Übersetzung des Textes unterstützen.
The method for resetting your password is different depending on whether you have a Linux Real-Time Target or not. Please read the relevant sections below.
First, check what version of LabVIEW Real-Time you have installed and check what operating system your real-time target runs. Then, follow the steps below for the associated versions.
Note: The password will be removed during this process. The IP configuration will need to be reconfigured. If your RIO has a physical DIP switches, follow these instructions:
Set the IP RESET switch to ON.
Reboot the controller.
Set the switch to OFF.
If your RIO does not have DIP switches, follow these instructions:
Hold the RESET button until the STATUS LED turns solid orange or yellow.
Release the RESET button and the controller will restart. The STATUS LED will blink three times indicating the controller is in Safe Mode.
Hold the RESET button again until the STATUS LED turns solid orange or yellow.
Release the RESET button and the controller will reset the password, reset the IP configuration, and restart in Safe Mode.
Find the RIO in MAX and restart the controller into Normal Mode.
Note: After this process, the RIO will be usable without a password, but all files that were on the RIO will be lost in the process. The security settings of the RIO now carry through an IP reset. The RIO controller will have to be reformatted in order to clear the password. Reboot the controller into Safe Mode, by using the DIP switches or holding the RESET button as described above.Reformat the controller in MAX.
Note: All myRIO systems run Linux Real-Time.
Our Technical Support Engineering department will be able to assist customers who need to reset passwords on Linux Real-Time targets. To get in touch with an Technical Support Engineer, navigate to ni.com/support to open a service request.
Collaborate with other users in our discussion forums
A valid service agreement may be required, and support options vary by country.